manualshive.com logo in svg

Toshiba Tecra 500CDT, User Manual

Share
Download
Toshiba Tecra 500CDT User Manual Download Page 102

Learning the Basics

Using the CD-ROM Drive  

Part I: Getting To Know Your Computer

101

Using the CD-ROM Drive

The CD-ROM drive is easy to use. You insert compact discs into 
it while the computer is turned on, and change compact discs 
whenever you want to (as long as the system is not reading from 
the disc).

Once you insert a CD-ROM into the drive, refer to the documenta-
tion provided with the compact disc to perform any necessary 
installation procedures.

If the diskette drive module is currently installed in the SelectBay, 
remove it and insert the CD-ROM module, following the instruc-
tions in “Swapping Drives in the SelectBay” on page 115.

Inserting a Compact Disc

To insert a compact disc into the CD-ROM drive, follow these 
steps:

Locating the CD activity light

1 Make sure the CD activity light is off.

CD activity light

000-book.bk : 04-basic.fm5  Page 101  Wednesday, May 15, 1996  3:50 PM

Summary of Contents for Tecra 500CDT





































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands