manualshive.com logo in svg

Toshiba Tecra 500CDT, User Manual

Share
Download
Toshiba Tecra 500CDT User Manual Download Page 178

The Wide World of Multimedia

Recording Sounds as Wave Files  

Part I: Getting To Know Your Computer

177

Recording Sounds as Wave Files

You may record sounds through the built-in microphone or, using 
the microphone jack or line-in jack, from an outside source. This 
section describes how to record sounds.

Using the Built-In Microphone

The easiest way to record is through the computer’s built-in 
microphone. To do this, follow these steps:

1 Click Start, then point to Programs.

2 Point to Accessories, then point to Multimedia.

3 Click Sound Recorder.

Windows 95 opens the Sound Recorder window.

4 Click the Record button. 

(It’s the red circle at the bottom right of the window.)

5 Speak normally into the microphone.

Locating the built-in microphone

6 When you’ve finished recording, click the Stop button.

The Audio Recorder window displays a graphical representa-
tion of the new sound file as a waveform display. 

Microphone

000-book.bk : 07-media.fm5  Page 177  Wednesday, May 15, 1996  3:50 PM

Summary of Contents for Tecra 500CDT





































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands