manualshive.com logo in svg

Toshiba Tecra 500CDT, User Manual

Share
Download
Toshiba Tecra 500CDT User Manual Download Page 19

Let's Start at the Very Beginning…

Connect to a Power Source

Part I: Getting To Know Your Computer

18

Before you can use the battery to power the computer, you must 
charge it. Leave the computer plugged in for at least two and a half 
hours with the computer turned off. Then the battery will be ready 
to power the computer.

Once the battery is charged for the first time, don’t leave the 
computer plugged in and turned off for more than a few hours 
at a time. Overcharging the battery shortens its life.

To connect your computer to a power source, follow these steps:

Connecting the power cable to the power socket

1 Connect the power cable to the power socket on the back of 

the computer.

2 Connect the other end of the power cable to a live wall 

outlet.

The AC power light on the front of the computer glows green.

Power cable

Power socket

000-book.bk : 02-start.fm5  Page 18  Wednesday, May 15, 1996  3:50 PM

Summary of Contents for Tecra 500CDT





































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands