manualshive.com logo in svg

Toshiba Tecra 500CDT, User Manual

Share
Download
Toshiba Tecra 500CDT User Manual Download Page 236

Keeping Your Files Safe

Using a Hard Disk Drive Password  

Part I: Getting To Know Your Computer

257

The Register Master Password warning box

15 Click Yes to register the password. 

Click No to cancel the password registration.

The HDD Password utility registers the password. If you chose 
to register a unique password for each hard disk drive, the 
HDD Password utility prompts you to enter the next password.

16 Repeat steps 12 through 15 for each drive that requires a 

new password.

Once you have entered a password for all selected hard disk 
drives, the HDD Password utility prompts you to create a pass-
word backup diskette. For instructions, see “Creating a Password 
Backup Diskette” on page 262.

Setting a Hard Disk Drive User Password

If you want to create a Master password that will bypass the 
User password in case it is forgotten, you must create a Mas-
ter password first. See “Setting a Hard Disk Drive Master 
Password” on page 253 for details.

To set a hard disk drive User password, follow these steps:

1 Click Start, then point to Programs.

2 Click Windows Explorer.

The Windows Explorer window opens.

11-safe.fm5  Page 257  Thursday, May 16, 1996  2:49 PM

Summary of Contents for Tecra 500CDT





































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands