Toshiba nv Series Hardware Manual Download Page 3

Page: 3 / 177

Unified Controller nv Series type1 light Controller Unit Operating Instructions

Safety Precautions

This product and instruction manual contains important information for safe and correct use to prevent

danger to the user and other people as well as damage to property.

Understand the following information (signs and symbols) before reading the text, and follow the

instructions.

Description of signs

Sign

Meaning of sign

Danger

Indicates an imminent hazardous situation which, if not avoided, may result in

death or serious injury

Warning

Indicates a potentially hazardous situation which, if not avoided, may result in

death or serious injury

Caution

Indicates a potentially hazardous situation which, if not avoided, may result in

minor or medium injury

or only property damage

*1: A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shock, broken

bones, or intoxication that will have aftereffects and require hospitalization or long-term hospital
visits for healing.

*2: An injury indicates injury, burn, or electric shock that does not need hospitalization or long-term

hospital visits for healing.

*3: A property damage indicates consequential damage in terms of breakage of properties or

materials.

Description of symbols

Symbol

Meaning of symbol

Prohibited

Indicates prohibition (must not do).

The specific details of prohibition are indicated inside or near with pictures or

text.

Instruction

Indicates instruction (must do).

The specific details of instruction are indicated inside or near with pictures or

text.

Warning

Indicates warning.

The specific details of warning are indicated inside or near

with pictures or

text.

(Note) The description of prohibition, instruction, and warning vary depending on the display on the main

unit.

Summary of Contents for nv Series


















































































































































































Search results

Summary of Contents for nv Series

Reviews:

Brands by name

Popular brands

Toshiba nv Series, Hardware Manual

Search results

Summary of Contents for nv Series

Reviews:

Brands by name

Popular brands