manualshive.com logo in svg

Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 98 / 179

Share
Download
Toshiba e-STUDIO 55 Operator'S Manual For Copying Functions Download Page 98

95

USING THE

SPECIAL

FUNCTIONS

When the copier is set up so that key copy counters can be used, you can make copies only
by inserting your key copy counter, and the copies made are recorded (added) in the key copy
counter. You can use any number of key copy counters.

Note: For details on how to use a key copy counter, consult a service technician.

2.  KEY  COPY  COUNTER  (OPTIONAL)

Procedure

The following message appears:

Set key copy counter

1

Insert the key copy counter.

.

Hold the counter so that the surface with an
arrow faces upward with the arrow pointed
toward the copier. Then insert it slowly until
it comes to a stop.

The following message appears:

READY

.

Make copies as you would normally do.

When you have finished making copies,

remove your key copy counter.

4

2

3

Summary of Contents for e-STUDIO 55




















































































































































































Reviews:

No comments