manualshive.com logo in svg

Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 93 / 179

Share
Download
Toshiba e-STUDIO 55 Operator'S Manual For Copying Functions Download Page 93

90

3

Select the desired exposure.

4

Place the original on the glass or the original

feed tray and press the START key.

5

15.  DOCUMENT  STORAGE  (Cont.)

Select the number (location) where you

want the document stored.

.

Press the desired number key, and then press
the  SET  key.

.

The keys are not highlighted even if images
are already stored there.
Confirm whether any document has been
stored or not by pressing the keys before
storing the new document.

1

Procedure (2)  PRINT  mode

Select the document storage function in

the Editing menu.

.

Press the EDIT key to enter the Editing menu,
and then press the DOCUMENT STORAGE
key.

.

If the corresponding key is not displayed,
switch the screen by pressing the  Next or
 Pre  key.

2

Press the  PRINT  key.

Summary of Contents for e-STUDIO 55




















































































































































































Reviews:

No comments