manualshive.com logo in svg

Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 50 / 179

Share
Download
Toshiba e-STUDIO 55 Operator'S Manual For Copying Functions Download Page 50

47

HOW TO

MAKE

COPIES

11. COPYING IN THE TEXT OR PHOTO MODE

You can select the copy mode (Photo/Text, Text or Photo) and produce clear copies matched
to the type of original. The text mode is suitable for making copies of originals containing
text, or text and line artwork. The photo mode is suitable for making copies of originals
containing black-and-white photos, colour photos or halftone photos. The Photo/Text mode
is set as the default mode. This mode is used for making copies of regular originals.

Place the original(s) on the original feed

tray or on the glass.

.

After aligning the edges of the originals, set
them  face up on the original feed tray and
align the slides to the edges of the originals.

1

.

Place the original face down on the glass, and
align it with the original scale on the left.

Note: Remove any paper clips or staples from

originals before placing them on the
original feed tray.

2

Press the  TEXT/PHOTO  key.

Slides

3

Press either the  PHOTO  or  TEXT  key.

.

The selected key is highlighted.

4

If necessary, press the        or        key

to adjust the exposure.

5

Select the desired copy size, reproduction

ratio and copy quantity.

6

Press the START key.

Note: The amount of toner consumed varies

depending on the originals and the image
quality mode.

Summary of Contents for e-STUDIO 55




















































































































































































Reviews:

No comments