manualshive.com logo in svg

Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 107 / 179

Share
Download
Toshiba e-STUDIO 55 Operator'S Manual For Copying Functions Download Page 107

104

7.  CHANGING  AUTOMATIC  ENERGY  SAVE TIME/  AUTOMATIC  SHUTOFF TIME

2

Press the PROGRAM key to enter the

Program menu.

Press the  Next  key on the PROGRAM

panel to display the panel on the right.

1

2

Press the  ENERGY SAVE  key on the panel

shown at the top.

.

The display on the right appears.

1

Select the desired number on the panel.

To change the Automatic Energy Save time

Press the  AUTO SHUTOFF  key on the

panel shown at the top.

.

The panel on the right appears.

1

Select the desired number on the panel.

2

To exit from the Automatic Energy Save mode

To change the Automatic Shutoff time

.

Press the ENERGY SAVER key or the START
key.

.

The copier starts warming up, then it becomes
ready after a short while.

.

Using the Auto Job Start mode is convenient.
See page 17.

To exit from the Automatic Shutoff mode

Turn the power switch ON.

.

The copier starts warming up, then the
message READY appears after approx.
7 minutes. See page 16.

.

Using the Auto Job Start mode is convenient.
See page 17.

1

Note: if the  ENERGY SAVE  or  AUTO SHUTOFF  key is not displayed on the screen, consult your

service technician.

Summary of Contents for e-STUDIO 55




















































































































































































Reviews:

No comments