manualshive.com logo in svg

Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 125 / 179

Share
Download
Toshiba e-STUDIO 55 Operator'S Manual For Copying Functions Download Page 125

122

6.  HOLE  PUNCHING  MODE

With the optional punching unit attached to the optional finisher (MJ-1015, MJ-1016), you can
have your copies punched with holes for binding.
• The thickness of paper should be in the range of 64~157 g/m

2

. Special paper such as OHP

film is excluded.

1

Place the originals.

.

Place the originals face up on the original feed
tray.

When Using the Automatic Document Feeder

2

Select the puncher mode.

.

Press the BASIC key to display the Basic
menu. Then press the NON-SORT NON-
STAPLE key.

.

Press the HOLE PUNCH key.

.

If the key for the desired funcion is not shown,
press the  Next  key to switch the screen.

Key in the copy quantity using the digital

keys.

.

When group-copying from the original
feed tray, you cannot vary the number of
copies for each original.

3

Summary of Contents for e-STUDIO 55




















































































































































































Reviews:

No comments