Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 61 / 179

58
2. EDGE ERASE COPYING
Example of Edge Erase Copying
Press the EDIT key to enter the Editing
menu.
.
The menu on the right appears.
1
Procedure
Press the EDGE ERASE key to select the
edge erase function.
2
Original
Edge-erased copy
How to Change the Edge Erase Margin
.
To change the edge erase margin, press the
5mm or 20mm key to select the desired
edge erase margin.
.
If the settings are OK, press the SET key.
3
Notes:
.
The edge erase margin changes at increments
of 1 mm on the front and rear sides.
.
About 45 seconds after copying, the edge
erase margin returns to the default 5 mm.
Place the original(s) on the original feed
tray or on the glass.
If the edges of an original are torn or dirty, they are reproduced as black stains on the copy.
In the edge erase mode, a white border will be created along the all edges of the copy eliminating
the marks. The default edge erase margin is 5 mm, but you can select any margin within the
range of 5 to 20 mm.