Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 159 / 179

156
8. REPLACING STAPLES (OPTIONAL) (Cont.)
8
Set the staple cartridge.
.
Insert the cartridge until the claw catches it.
Note: Repeat steps 1 to 11 if the test stapling
is not performed and "Set staple cartridge"
is displayed.
9
Reinstall the stapler unit in its previous
position.
.
Turn the blue lever 90 degrees to the right
to latch the stapler unit.
Confirm that the finisher is attached to the
copier, and that the paper size is set to any
size other than A5-R.
.
A staple test cannot be performed when only
the A5-R paper is available. So make sure to
set another size.
10
11
Close the front cover of the finisher.
Test stapling is automatically carried out
at some of 12 places of a blank sheet of
paper as in the right-hand figure.
No.12
No.3
No.2
No.1
Direction of
paper path
Staple
cartridge