manualshive.com logo in svg

Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 103 / 179

Share
Download
Toshiba e-STUDIO 55 Operator'S Manual For Copying Functions Download Page 103

100

How to Cancel the Operation of the Weekly Timer

You can cancel the operation of the weekly timer so that the copier can be turned ON and OFF
as normal by the power switch. (Weekly timer ON/OFF settings are held in the memory even
if operation of the weekly timer is cancelled.) Once cancelled, operation of the weekly timer
can be restored at any time you like.

Select the timer function in the Program

menu.

.

Press the  PROGRAM   key to enter the Program
menu and then press the  WEEKLY TIMER
key.

.

The menu on the right appears.

1

Check that the  WEEKLY TIMER  key is

highlighted. Then press the  WEEKLY TIMER

key to return the display to normal. This

turns the weekly timer OFF.

2

4.   WEEKLY TIMER  (Cont.)

How to Use the Copier when It has been Turned OFF

If you want to use the copier when it has

been turned off by the weekly timer, press

the START key.

.

If nothing is input for five minutes after the
copier is turned on, it will be automatically
turned off again.

Summary of Contents for e-STUDIO 55




















































































































































































Reviews:

No comments