manualshive.com logo in svg

Toshiba e-STUDIO 55, Operator'S Manual For Copying Functions, Page: 29 / 179

Share
Download
Toshiba e-STUDIO 55 Operator'S Manual For Copying Functions Download Page 29

26

3. COPYING IN THE AUTOMATIC PAPER SELECTION MODE (Cont.)

.

If you press the FUNCTION CLEAR key, all current
copier settings will be cleared, and returned to the
default settings. For details on the default copy
mode, see page 54.

5

Press the START key.

.

Copying starts and when the required number
of copies are made, the copier automatically
stops.

.

If you do not press the START key within
about 45 seconds after having set the desired
copy modes, the functions you have selected
are automatically cleared and the copier
returns to the default copy mode.

Note: The copier may not be able to detect the

size of the following types of originals in
the APS mode:

.

Transparent originals such as OHP film

.

Originals with black areas

1

2

3

4

5

6

7

8

9

0

C

FC

1

2

3

4

5

6

7

8

9

0

C

FC

Summary of Contents for e-STUDIO 55




















































































































































































Reviews:

No comments