Toshiba e-STUDIO 407CS Series, Printing Manual

Page: 66 / 204

2 PRINTING FROM WINDOWS
64 Setting Up Print Options
SNMP Settings
1) Version
Be sure to have the correct SNMP version set for your MFP and select from the following options:
- V1/V2 — Select this option to enable SNMP V1 and V2.
- V3 — Select this option to enable SNMP V3.
- V1/V2/V3 (for [Discovery Settings] dialog box only) — Select this option to enable SNMP V1, V2, and V3.
2) SNMP V1/V2
Community Name —If a community name other than “private” (default) is set for the SNMP community name for your
MFP, enter its community name.

To find your MFP under the SNMP V1/V2 environment, the community names set for the target MFP must be
specified correctly. For help, consult your administrator.
 To change the community name, the administrator privilege is necessary. You must log in with the
“Administrator” privilege and open the printer driver properties.

Up to 31 characters including the following symbols can be entered for the Community Name.
! " # $ % & ' ( ) * + , - / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
3) SNMP V3
If SNMP V3 is enabled, select one of the following items to set how users are authenticated.
User ID File — Select this option when you want to use a user ID file. Click [Browse] and specify the user ID file.
User Name/Password — Select this option when you want to use the user name and password. When this option is
selected, use the keyboard to select the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
- Privacy Password

If you select to enable SNMP V3, consult your network administrator for preliminary advice on how to
authenticate users.
 Up to 31 characters including the following symbols can be entered for each of the User Name, Authentication
Password and Privacy Password.
! $ % & ' ( ) - , < > @ [ ] ^ _ ` { } ~
4) [Restore Defaults]
Click this button when you want to reset all the settings back to the defaults.
1
2
3
4