Toro Multi Pro 1750, Operator'S Manual

Page: 60 / 76

g033327
Figure 64
1. Gasket 6. 3-pin connector (valve
actuator—agitation valve)
2. Flange (pressure-filter
head) 7. Socket (outlet fitting)
3. Manifold (agitation valve) 8. Retainer
4. Flange (bypass
valve—agitation valve) 9. Clamp
5. Flange (master-section
valve)
3. Remove the flanged-head bolt and flanged
locknut that secures the agitation valve to the
valve mount and remove the valve manifold from
the machine (
Figure 65 ).
g033307
Figure 65
1. Flanged-head bolt 3. Valve mount
2. Manifold (agitation valve) 4. Flanged locknut
Removing the
Master-Section-Manifold Valve
1. Remove the clamps and gaskets that secure the
manifold for the master-section valve (
Figure 66 )
to the master-section-bypass valve, agitation
valve, and master-section-manifold valve (at the
end of the hose for the flow meter).
Note:
Retain the clamp(s) and
gasket(s) for installation in Installing the
Master-Section-Manifold Valve (page 65) .
2. Remove the retainer that secures the outlet
fitting to the manifold for the master-section
valve (
Figure 66 ).
g033328
Figure 66
1. Gasket 5. 3-pin connector (valve
actuator—master-section
valve)
2. Flange
(bypass—master-section
valve) 6. Socket (outlet fitting)
3. Flange (agitation valve)
7. Retainer
4. Manifold (master-section
valve) 8. Clamp
3. Remove the flanged-head bolt and flanged
locknut that secures the master-section valve to
the valve mount and remove the valve manifold
from the machine (
Figure 67 ).
60