Cleaning the Sprayer
Valves
•
To clean the rate-control valve, refer to the
following sections:
1.
Removing the Valve Actuator (page 58)
2.
Removing the Rate-Control-Manifold Valve
(page 59)
3.
Cleaning the Manifold Valve (page 62)
4.
Assembling the Manifold Valve (page 63)
5.
Installing the Rate Control Manifold Valve
(page 64)
6.
Installing the Valve Actuator (page 67)
•
To clean the agitation valve; refer to the following
sections:
1.
Removing the Valve Actuator (page 58)
2.
Removing the Agitation-Manifold Valve
(page 59)
3.
Cleaning the Manifold Valve (page 62)
4.
Assembling the Manifold Valve (page 63)
5.
Installing the Agitation-Manifold Valve (page
64)
6.
Installing the Valve Actuator (page 67)
•
To clean the master-section valve, refer to the
following sections:
1.
Removing the Valve Actuator (page 58)
2.
Removing the Master-Section-Manifold
3.
Cleaning the Manifold Valve (page 62)
4.
Assembling the Manifold Valve (page 63)
5.
Installing the Master-Section-Manifold Valve
(page 65)
6.
Installing the Valve Actuator (page 67)
•
To clean the 3 section valves; refer to the following
sections:
1.
Removing the Valve Actuator (page 58)
2.
Removing the Section-Manifold Valve (page
61)
3.
Cleaning the Manifold Valve (page 62)
4.
Assembling the Manifold Valve (page 63)
5.
Installing the Section Manifold Valve (page
66)
6.
Installing the Valve Actuator (page 67)
Removing the Valve Actuator
1.
Position the sprayer on a level surface, engage
the parking brake, shut off the pump, shut off the
engine, and remove the key.
2.
Remove the 3-pin connector of the valve
actuator from the 3 socket electrical connector
of the sprayer harness.
3.
Remove the retainer that secures the a actuator
to the manifold valve for the rate control,
agitation, master section, or section valve
(
).
Note:
Squeeze the 2 legs of the retainer
together while pushing it down.
Note:
Retain the actuator and retainer for
installation in
Installing the Valve Actuator (page
.
g028237
Figure 61
Section-Valve Actuator Shown (the agitation-valve actuator
is similar)
1.
Valve actuator (section
valve shown)
3.
Stem port
2.
Retainer
4.
Remove the actuator from the manifold valve.
58
Summary of Contents for Multi Pro 1750
Page 72: ...Schematics g028078 Sprayer System Schematic Rev DWG 125 0698 Rev B 72...
Page 73: ...Notes...
Page 74: ...Notes...