Engine Maintenance
Checking the Air-Intake
Screen
Service Interval:
Before each use or daily—Check
the engine-rotating screen.
Every 100 hours—Clean the engine-rotating
screen (more often in dusty, dirty conditions).
Check and clean as necessary the air-intake screen
on the front of the engine before each use or daily.
Servicing the Air Cleaner
Service Interval:
Every 50 hours/Yearly (whichever
comes first) (more often in dusty,
dirty conditions).
Every 200 hours/Yearly (whichever comes first)
(more often in dusty, dirty conditions).
Removing the Foam and Paper
Elements
1.
Set the parking brake, stop the pump, shut off
the engine, and remove the ignition key.
2.
Release the latch on the back of the seat and lift
the seat forward.
3.
Clean around the air cleaner to prevent dirt from
getting into the engine and causing damage
(
).
g001980
Figure 34
1.
Air-cleaner cover
5.
Foam element
2.
Knob
6.
Paper element
3.
Cover nut
7.
Rubber seal
4.
Cover
8.
Air-cleaner base
4.
Loosen the knob on the air-cleaner cover and
remove the cover (
).
5.
Carefully slide the foam element off the paper
element (
6.
Unscrew the cover nut and remove the cover
and paper element (
).
Cleaning the Foam Element
1.
Wash the foam element in liquid soap and warm
water.
2.
When the element is clean, rinse it thoroughly.
3.
Dry the element by squeezing it in a clean cloth.
4.
Put 30 to 59 ml (1 to 2 fl oz) of oil on the element
(
).
Important:
Replace the foam element if it
is torn or worn.
g001981
Figure 35
1.
Foam element
2.
Oil
5.
Squeeze the element to distribute the oil.
Checking the Paper Element
Inspect the paper element for tears, an oily film,
damage to the rubber seal, excessive dirt, or other
damage (
). If any of these conditions exist,
replace the filter.
Important:
Do not clean the paper element with
pressurized air or liquids, such as a solvent,
gasoline, or kerosene.
g001982
Figure 36
1.
Paper element
2.
Rubber seal
Important:
To prevent engine damage, always
operate the engine with the complete foam and
paper air-cleaner assembly installed.
42
Summary of Contents for Multi Pro 1750
Page 72: ...Schematics g028078 Sprayer System Schematic Rev DWG 125 0698 Rev B 72...
Page 73: ...Notes...
Page 74: ...Notes...