Safety
Improper use or maintenance by the operator or owner
can result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger. Failure to comply with
the instruction may result in personal injury or death.
The machine was evaluated to the requirements of
SAE J2258.
General Safety
This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator’s Manual
before starting the engine.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep clear of any discharge opening. Keep
bystanders and pets a safe distance away from
the machine.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Stop the machine and shut off the engine before
servicing, fueling, or unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this
Operator’s Manual
.
Safe Operating Practices
Important:
The machine is designed primarily
as an off-road vehicle and is not intended for
extensive use on public roads. When using
the machine on public roads, follow all traffic
regulations and use any additional accessories
that may be required by law, such as lights, turn
signals, slow-moving-vehicle (SMV) sign, and
others as required.
The Multi Pro 1750 Turf Sprayer was designed
and tested to offer safe service when operated and
maintained properly. Although hazard control and
accident prevention partially are dependent upon the
design and configuration of the machine, these factors
are also dependent upon the awareness, concern,
and proper training of the personnel involved in the
operation, maintenance and storage of the machine.
Improper use or maintenance of the machine can
result in injury or death.
Not all of the attachments that adapt to the Multi Pro
1750 Turf Sprayer are covered in this manual. See
the specific operator’s manual provided with each
attachment for additional safety instructions. Read
these manuals.
To reduce the potential for injury or death, comply with
the following safety instructions:
Supervisor's Responsibilities
•
Make sure that operators are thoroughly trained
and familiar with the
Operator's Manual
, engine
manual, and all labels on the machine.
•
Establish your own special procedures and work
rules for unusual operating conditions (e.g., slopes
too steep for sprayer operation).
Before Operating
•
Operate the machine only after reading and
understanding the contents of this manual.
•
Never allow children to operate the machine.
•
This machine is designed to carry the operator.
Never carry any passengers on the machine.
•
Never operate the sprayer when ill, tired, or under
the influence of drugs or alcohol.
•
Become familiar with the controls and know how
to shut off the engine quickly.
•
Keep all shields, safety devices, and decals
in place. If a shield, safety device, or decal is
malfunctioning, illegible, or damaged, repair or
replace it before operating the machine.
•
Wear appropriate clothing; including safety
glasses, long pants, substantial slip-resistant
footwear, gloves, and hearing protection. Do not
wear jewelry or loose clothing. Tie back long hair.
CAUTION
This machine produces sound levels in
excess of 85 dBA at the operator’s ear and
can cause hearing loss through extended
periods of exposure.
Wear hearing protection when operating
this machine.
4
Summary of Contents for Multi Pro 1750
Page 72: ...Schematics g028078 Sprayer System Schematic Rev DWG 125 0698 Rev B 72...
Page 73: ...Notes...
Page 74: ...Notes...