Toro Multi Pro 1750, Operator'S Manual

Page: 64 / 76

Installing the Rate Control
Manifold Valve
1. Align a gasket between the flanges of the rate
control valve manifold and the pressure filter
head (
Figure 75 A).
Note:
If needed, loosen the mounting hardware
for the pressure filter head as needed to provide
clearance.
g033311
Figure 75
1. Locknut (1/4
inch) 5. Gasket 9. Coupling
(manifold-valve)
2. Valve mount 6. Flange clamp 10. Socket (outlet
fitting)
3. Flange
(agitation-valve) 7. Flange
(pressure filter
head) 11. Retainer
4. Flanged-head
bolt (1/4 x 3/4
inch) 8. Flange (rate
control valve)
2. Assemble the rate control valve manifold,
gasket, and pressure filter head with a flange
clamp and tighten by hand (
Figure 75 A).
3. Align a gasket between the flanges of the rate
control valve and the agitation-valve manifold
(
Figure 75 A).
4. Assemble the rate control valve manifold,
gasket, and agitation-valve manifold with a
flange clamp and tighten by hand (
Figure 75 A).
5. Assemble the rate control valve to the valve
mount with the 2 flanged-head bolts and 2
flanged locknuts (
Figure 75 A) that you removed
in step 3 of Removing the Rate-Control-Manifold
Valve (page 59) and torque the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
6. Assemble the outlet fitting onto the coupling
fitting at the bottom of the manifold for the rate
control valve (
Figure 75 B).
7. Secure the outlet fitting coupling fitting by
inserting a retainer into the socket of the outlet
fitting (
Figure 75 B).
8. If you loosened the mounting hardware for the
pressure filter head, tighten the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
Installing the Agitation-Manifold
Valve
1. Align the flange of the agitation-valve manifold,
1 gasket, and the flange of the agitation-bypass
valve (
Figure 76 A).
Note:
If needed, loosen the mounting hardware
for the master-section valve as needed to
provide clearance.
64