Toro Multi Pro 1750, Operator'S Manual

Page: 65 / 76

g033329
Figure 76
1. Flange clamp 7. Flanged locknut
2. Gasket 8. Flange (rate-control valve)
3. Manifold (agitation valve) 9. Flange (master-section
valve)
4. Flange
(manifold—agitation-bypass
valve) 10. Retainer
5. Flanged-head bolt 11. Socket (outlet fitting)
6. Valve mount
2. Assemble the agitation-bypass valve, gasket,
and agitation-valve manifold with a clamp
tightened by hand (
Figure 76 A).
3. Align a gasket between the flanges of the
rate-control valve and the agitation-valve
manifold (
Figure 76 B).
4. Assemble the gasket and agitation-valve
manifold with a clamp tightened by hand (
Figure
76 B).
5. Align a gasket between the flanges of the
agitation-valve manifold and the master-section
valve (
Figure 76 B).
6. Assemble the agitation-valve manifold, gasket,
and master-section valve with a clamp tightened
by hand (
Figure 76 B).
7. Assemble the agitation-valve manifold and
socket with a clamp tightened by hand (
Figure
76 C).
8. Secure the end-cap fitting to the outlet fitting by
inserting a retainer into the socket of the outlet
fitting (
Figure 76 C).
9. Assemble the agitation valve to the valve mount
with the flanged-head bolt and flanged locknut
that you removed in step
3 of Removing the
Agitation-Manifold Valve (page 59) and torque
the nut and bolt to 1017 to 1243 N∙cm (90 to
110 in-lb).
10. If you loosened the mounting hardware for the
master-section valve, tighten the nut and bolt to
1978 to 2542 N∙cm (175 to 225 in-lb).
Installing the
Master-Section-Manifold Valve
1. Align the flange of the master-section-valve
manifold, 1 gasket, and the flange of the
master-section-bypass valve (
Figure 77 A).
g033330
Figure 77
1. Flange clamp 6. Valve mount
2. Gasket 7. Flanged locknut
3. Manifold (master-section
valve) 8. Flange (agitation valve)
4. Flange
(bypass—master-section
valve) 9. Retainer
5. Flanged-head bolt 10. Socket (outlet fitting)
65