Toro 07511AA, Service Manual

Page: 10 / 384

Safety Instructions
The Outcross 9060 machine is tested and certified by Toro for compliance
with existing safety standards and specifications. Although hazard control and
accident prevention are partially dependent upon the design and configuration of
the machine, hazard control and accident prevention are also dependent upon
the awareness, concern and proper training of the personnel involved in the
operation, transport, maintenance and storage of the machine. Improper use or
maintenance of the machine can result in injury or death. To reduce the potential
for injury or death, comply with the following safety instructions.
WARNING
To reduce the potential of injury or death, comply with the following
safety instructions as well as information found in the traction unit
Operator’s Manual , accessory Installation Instructions , and the
Operator and Safety Training Videos found on www.toro.com .
Supervisor’s Responsibilities
1. Ensure that the machine operators are fully trained and familiar with the
traction unit Operator’s Manual , all of the operating and safety decals on the
machine, and any operation information found in the Installation Instructions
for accessories that are installed on the machine.
2. Establish your own special procedures and work rules for unusual operating
conditions (e.g., slopes too steep for machine operation). Survey the work
site completely to determine hills on which you can operate safely. When
performing this site survey, always understand and take into consideration
the turf condition and rollover risk.
Safety: Safety Instructions Page 1–2 Outcross 9060
18234SL Rev B