- 9 -
WARNING
● Check the following items before operation.
○ Check for any deformation, crack or damage on wrench body,
reaction plates, electric cord, power plug, socket, O-ring, pin、
batteries, metal case, hex key wrench and screwdrivers (-).
Do not use wrench if any of the above items are abnormal.
○ Make sure that the socket and the reaction plate are correctly
installed on the wrench.
○ Make sure that set screws for the reaction plate are securely fastened.
Loose installation may result in electric shock, fire, burn and personal
injury.
● Use AA alkaline dry cells or rechargeable nickel hydride
batteries only.
Failure to follow this instruction may result in fire, burn, injury, accident,
malfunction, loss of torque precision or etc.
● Handle batteries with care.
○ Make sure the polarity of the batteries is correct.
○ Do not heat, short circuit, disassemble or throw them into the fire.
○ Do not mix new and old batteries.
○ Do not use AA alkaline dry cells with other types of batteries.
○ Do not recharge conventional dry cell batteries.
○ Immediately wash with clean water and receive medical
treatment if battery electrolyte enters into eyes.
○ Immediately wash with clean water if battery electrolyte adheres to
skin or cloth.
○ Remove the batteries when they are ran out or the wrench is going
to be left unused.
○ Follow other precautions written on the batteries.
Failure to follow these instructions may result in fire, burn injury, accident,
malfunction, electrolyte leakage or loss of torque precision.
