- 38 -
When microSD card is not installed
Approx. set up time: 6 sec
①Press PWR
button for approx 1 sec at
no-load.
② All digits will appeared in the window and power
is turn on.
③
（ no microSD ） will appear in the
window if microSD card is not installed.
④
will appear if Auto Start is
selected. No
sign will appear if
Auto Start is not selected.
（オートスタート・モードの場合）
⑤Zero adjustment will be made when
is
displayed and then zero adjustment is
completed when
is appeared.
NOTE Zero adjustment is automatically made when
power is just turned ON.
NOTE When tightening torque is measured without microSD memory card, the
clock is used only for purpose of “5-6 Display setting state and battery
power level” (See Page 19.) In this case, setting the clock is not
necessary.
CAUTION
●
Never apply load during
is displayed as zero
adjustment is being made.
●
Only apply load when
is displayed.
●
（Error Over Load） will appear right after
is
displayed when load is applied beyond rated torque range.
Measured torque cannot be guaranteed in such case (see page
43).
