- 30 -
6-2. Turn Display ON
Push PWR
button for more than 1 second
at no-load.
Torque measurement is ready when
is
displayed in the window.
NOTE Refer page 38
CAUTION
● Do not apply any load until window displays
Precise torque measurement cannot be achieved if zero adjustment is
improperly made.
6-3. Place the wrench to the bolt/nut to be tightened then properly place
reaction plate on the bolt/nut adjacent to the bolt/nut to be
tightened.
WARNING
● Do not touch reaction plate when operating.
Failure to follow this instruction may result in personal
injury like finger amputation.
Adjacent Nut
Socket Rotation
Reaction Plate Rotation
