- 45 -
8-7-1. Change Group File
Torque data management can be done by group by saving the data in different group
files.
① Call
“
Change Group
”
menu
② Press SET●to run
“
Change Group
”
menu
③ Following
, existing
group file name is scrolled. In the next tightening
measurement, the data will be saved in a new
group file whose serial number is greater than the
previous file name by 1.
NOTE When a group file is changed at the beginning on
2007/12/01 as described in “Data Folder
Configuration (e.g.)” (See Page), the display
scrolls
the
old
group
file
name
.
The group file named “
07C01002.CSV
” having
a serial number incremented by 1 is the new data
storage.
NOTE Example designation of group file name.
： Figure 「
5
」，
： Figure 「
6
」，
： Alphabet 「
B
」， ： Alphabet 「
D
」
NOTE Group file name scrolls twice on the window. When SET● oｒ SELECT○ button
is pressed during scrolling, it immediately reads
.
NOTE Display
indicates that changeable group
file is not found.
CAUTION The maximum number of tightening torque data that can be in a group file is
999 (up to TORQUE DATA No. 999).
If the number exceeds 999, the next data will be saved in the new file as
created in step ③ above automatically. (See p. 49)
.
（Only when microSD card is installed）
