- 31 -
CAUTION
● Beware that reaction plate rotates opposite direction to that of
bolt/nut rotating direction.
● Reaction force must be taken by area beyond “a” dimension
when L-type reaction plate is used. See table below.
There is a chance to invite overload when
reaction force is taken within
“
a
”
dimension which
may result in breakage of the HSH set screws,
seizure of the output square drive or loss of
torque precision.
Model
a (mm)
PDX-301N/PDX-302N/PDX-301F
130
PDX-501N/PDX-502N/PDX-501F
135
● Fully slide the socket over the bolt/nut.
Insufficient socket engagement
may cause damage to the
bolt/nut or slip off of the socket
which may result in injury or
malfunction of the wrench.
6-4. Adjust Torque Setting Dial
Adjust torque setting dial to match
your target torque and measured
torque on the display. Refer
procedure on page 36.
ａ
すき間
５０
× １ ０ ０
Ｎ ｍ
４０
２０
３０
５０
４０
２０
３０
