- 59 -
11. Error and Status indication
11-1. LED for judgment and error indication
DIGITORQON is provided with green and red LED that indicate whether the
tightening has successfully completed or not, or an error has occurred or not.
: Lights Out
: Light On
: Quick On & Off (5 times/sec)
: On & Off (2 times/sec)
: Slow On & Off (1 times/sec)
Normal Condition
Indication
LED Meaning
Indication
LED Meaning
↓
After 1 sec.
Power ON
↓
“
Ready
”
↓
Start Tightening
↓
Complete Tightening
No-load operation
↓
Tightening operation
↓
Tightening Finished
Trouble Detected
Indication
LED Meaning
Remedy
・Tightening was not finished
normally.
・Check tightened bolts and nuts.
・Release trigger switch before
tightening finished.
・Do not release trigger switch during
tightening.
・Tightening the same bolts twice. ・Never tighten the same bolts twice.
・Inching action detected.
・Avoid inching action of trigger
switch.
↓
Reset
Ready
＜Method of Reset＞
* To reset the wrench, squeeze the
trigger switch once.
And then, the wrench is now ready.
Troubles happen on the
“
DIGITORQON
”
Need to repair.
Contact your distributor.
↕
Alternation
