130
(*1)
0 dB = 1V
35. SPECIFICATIONS
Note:
The design and specifications are subject to change without notice for improvement.
Power Source
220 – 240 V AC 50/60 Hz
Power Consumption
0.38 A
Image Compression
System
Motion-JPEG
Video Format
PAL
Recording Medium
SATA Hard Disk
Video Input
9 channels, VBS1.0 V(p-p), 75
Ω
, BNC
Video Output
9 channels, VBS1.0V(p-p), 75
Ω
, BNC, loop-through
Monitor Output
2 channels, VBS1.0V(p-p), 75
Ω
, BNC, The monitor output 2 is dedicated to real time image
(Full-screen and 4-segment split screen displays only.)
Link Input
(*2)
1 channel, VBS1.0V(p-p), 75
Ω
, BNC
Audio Recording System
8 bits, Linear PCM, sampling frequency: 16 kHz
Audio Input
1 channel, –10 dB
(*1)
, 10 k
Ω
, unbalanced, RCA pin jack
Audio Output
1 channel, –10 dB
(*1)
, 600
Ω
, unbalanced, RCA pin jack
Screen Display
1-, 4-, 9-segment screen sequence, electronic 2 x zoom
Picture Quality
Changeable in 5 steps, 64 KB (Quality 1), 40 KB (Quality 2), 32 KB (Quality 3),
24 KB (Quality 4), 16 KB (Quality 5)
Pixels
720 x 288 pixels
Recording Rate
Total recording rate 100 IPS (each camera can be individually set for the following rate)
50, 25, 13, 6, 3, 1, 1/2.5, 1/4, 1/5, 1/10, 1/20, 1/30, 1/60 IPS
Pre Recording
Max. 5 min (0 - 300 s)
Alarm Recording
Max. 999 s (0 - 999 s), non-limit
Motion Recording
Max. 999 s (1 - 999 s), non-limit
Date/Time
Year/ month/ date/ hour/ minute/ second, 24-hours format display,
monthly deviation of within ±30 s (25°C (77°F)), can be operated until the year 2099
Motion Detect
5 Sensitivity levels, can be turned on/off for individual areas
Search Function
Date/Time search, Event search (Priority recording, Alarm-input recording,
Normal recording, Motion detect recording)
Alarm Input
9 channels (EDGE, LEVEL), no-voltage make contact input, open voltage: 2 V DC,
short-circuit current: 1.5 mA, minimum short-circuit time: 100 ms or more,
loop resistance: 100
Ω
or less, screwless connector
Control Output
4 channels (can be set for Priority recording, Alarm-input recording, Motion detect recording,
Video loss, HD full, Fan failure, and HD error) open collector output,
withstand voltage: 30 V DC, control current : 20 mA, screwless connector
Priority Recording
Input
1 channel, no-voltage make contact input, open voltage: 2 V DC, short-circuit current: 1.5 mA,
minimum short-circuit time: 100 ms or more, loop resistance: 100
Ω
or less, screwless connector
Time Synchronization
Input
1 channel, no-voltage make contact input, open voltage: 2 V DC, short-circuit current: 1.5 mA,
minimum short-circuit time: 100 ms or more, loop resistance: 100
Ω
or less, screwless connector
Time Synchronization
Output
1 channel, open collector output, withstand voltage: 30 V DC, control current: 20 mA,
screwless connector,
Camera Control
1 channel, RS-485: screwless connector
Remote Control
1 channel, RS-485: screwless connector or RJ11
Disk Array
2 channels, eSATA (and dedicated control signal), eSATA connector and modular connector
Communication Function
RS-232C: D-sub connector (9 P, male), 10 BASE-T/100 BASE-TX Ethernet: RJ45
Other Function
Mail transmission capability, USB terminals (archive, key lock), Web function (live,
reproduced images, remote, menu), Language choice (English/French/Japanese)
Applicable DVD Medium
DVD-R
Altitude
3000 m (9842.52 ft) or less (relative to sea level)
Operating Temperature
+5 ºC to +40 ºC (41 ºF to 104 ºF)
Operating Humidity
80 % RH or less (no condensation)
Finish
Panel: Surface-treated steel plate, black, paint, 30% gloss
Case: Pre-coated steel plate, black
Dimensions
420 (W) x 93.9 (H) x 332.8 (D) mm (16.54 "x 3.7" x 13.1")
Weight
6 kg (13.23 lb)
C-DR091D
(*2)
Connect the monitor output of other digital video recorder (C-DR091/161 series) to this terminal. Up to 8 cascade-
connected digital video recorders can be operated and monitored with a single monitor by using the C-RM1000 Remote
Controller (option).