V250 Hybrid NVR Rev II
Simple. Scalable. Secure.
VIDEO MANAGEMENT |
GETTING STARTED |
V250 Hybrid NVR Rev II
Quick Start Guide
Package Contents
Before You Begin
1. Connect all cameras to PoE Camera Switch with Cat5, Cat5e, or Cat6
networking cable. For the V250-8A16 Hybrid, 8 ports are available.
2. Connect all analog cameras. 16 channels are available.
3. Connect the Corporate LAN Port to your Site LAN.
4. Connect a monitor to either HDMI, DVI and / or VGA.
5. Connect your mouse and keyboard (included) to the rear PS/2 ports.
6. Connect power.
a. The V250 Hybrid will automatically power on and boot into a Wizard which will
guide you through the configuration of your video recorder.
PART NAME
FUNCTION
1
POWER
Shows the Power On/Off Status
2
Tx/Rx
Blinks to indicate network usage
3
ALARM
Blinks to indicate the alarm I/O has been triggered
4
REC
Blinks to inidcate data is being recorded to the HDD
5
USB
USB 2.0 port
1
NVR
POWER CABLE
RACK MOUNT EARS
MOUSE
KEYBOARD
TERMINAL BLOCK (FOR ALARMS)
2
3
4
5
SPEC
VALUE
Voltage
100V-240V, 6A, 50HZ-60HZ
Operating Environment
Indoor Equipment Only
Operating Temperature
32 -113° F / 0 - 45° C
Humidity
20~90% RH
Operating Information
