49
17.2. Event Search
The event search begins under the designated conditions.
E V E N T
S E A R C H
C A M E R A
C A M 1
E V E N T
M O T I O N
S T A R T
T I M E
J A N /
1 / 0 5
0 0 : 0 0 : 0 0
E N D
T I M E
J A N /
2 / 0 5
2 3 : 5 5 : 5 9
S E A R C H
E X E C U T E
S E A R C H
S C R E E N
D I S P L A Y
T I M E
F E B / 2 4 / 0 5
0 5 : 0 0 : 0 0
C A M 1
Item
CAMERA
EVENT
Description
Select the camera number to search.
Select the event type to search.
Selection
CAM 1-16 / ALL
PRIORITY / NORMAL /
ALARM / MOTION / ALL
JAN / 01 / 00 00:00:00
- DEC / 31 / 99 23:59:59
JAN / 01 / 00 00:00:00
- DEC / 31 / 99 23:59:59
START TIME
Designate the search start time. It is not possible to enter
a start time value that is greater than that of the end time.
Designate the search end time. It is not possible to enter
an end time value that is smaller than that of the start time.
END TIME
EXECUTE
Search begins if Execute is selected.
SEARCH
Indicates the time when the search screen is displayed.
SEARCH SCREEN
DISPLAY TIME
1. Press the Search key.
The search screen is displayed.
2. Select "EVENT SEARCH," then press the Menu key.
Event search screen is displayed.
3. Move the cursor with the [
], [
], [
], and [
]
keys, and perform camera, event, start time and end time
settings using the [+] and [-] keys.
4. Move the cursor to "EXECUTE," then press the Menu key.
Event search list is displayed.
5. Move the cursor using the [
] and [
] keys, select the
desired event from the event search list, and then press the
Menu key. The image at the event start time is displayed in
freeze-frame on the 16-segment (or 9-segment) split screen
display.
An error message is displayed at upper right of the screen if
images does not exist after the designated time.
Pressing the Menu key moves the cursor to the previous
position.
N O T H I N G F O U N D O K
An error message is displayed if an event corresponding to the
designated conditions does not exist. Pressing the Menu key
moves the cursor to the previous position.
N O T H I N G F O U N D O K
Notes
• In some cases, changing the current time may make it impossible to search by time when duplicate time
data exists in the hard disk.
• When recording with overwrite permission, recorded images are overwritten three minutes after the time
search screen has been displayed, making it impossible to search or display data in the vicinity of the oldest
time. Refer to Search Screen Display Time.
