82
Item
Selection
Description
REC
REC RATE
QUALITY
ON / OFF
ON: Recording is performed during Alarm event recording *
1
OFF: Recording is not performed during Alarm event recording *
1
Sets the recording rate during recording. *
1
*
2
EVENT
For setting, refer to
p. 83
; Event setting.
*
1
Can be set for each camera.
*
2
For recording rate, refer to
p. 44
; Recording rate and
p. 117
; Recording time table.
Note:
Underlined settings represent factory-preset settings.
1 HIGH
2
3 MID
4
5 LOW
Sets the picture quality level for the recording *
1
1: 64 KB (High picture quality)
2: 40 KB
3: 32 KB
4: 24 KB
5: 16 KB (Low picture quality)
50 IPS / 25 IPS / 13 IPS /
6 IPS / 3 IPS / 1 IPS / 1/2.5 IPS
/ 1/4 IPS / 1/5 IPS / 1/10 IPS /
1/20 IPS / 1/30 IPS / 1/60 IPS
/ 0 IPS
REC RATE
EXCEPT EVENT
CAM
Set the recording rate for the cameras, for which alarm events
have not occurred, out of those to be recorded during alarm
event recording.
3 IPS / 1 IPS / 1/2.5 IPS / 1/4 IPS
/ 1/5 IPS / 1/10 IPS / 1/20 IPS /
1/30 IPS / 1/60 IPS / 0 IPS
A L A R M
E V E N T
R E C
S E T T I N G
A
R E C
R E C
R A T E
Q U A L I T Y
E V E N T
C A M 1
O N
6 I P S
4
C A M 2
O N
3 I P S
3 ( M I D )
C A M 3
O N
1 3 I P S
2
C A M 4
O N
1 3 I P S
1 ( H I G H )
C A M 5
O F F
1 / 6 0 I P S
2
C A M 6
O F F
-
-
C A M 7
O F F
-
-
C A M 8
O F F
-
-
C A M 9
O F F
-
-
C A M 1 0
O F F
-
-
C A M 1 1
O F F
-
-
C A M 1 2
O F F
-
-
C A M 1 3
O F F
-
-
C A M 1 4
O F F
-
-
C A M 1 5
O F F
-
-
C A M 1 6
O F F
-
-
R E C R A T E
E X C E P T
E V E N T
C A M
3 I P S
T O T A L
R E C
R A T E
3 5 . 1 5 6 3 I P S
O N
[ Alarm Event Recording Setting ]
Preset camera images are automatically recorded when an
alarm event occurs. Recording "Enable" (ON) or "Disable"
(OFF), recording rate, picture quality and event settings can be
performed for each camera. The recording rate for cameras
other than alarm event-activated cameras and the total
recording rate are both displayed near the bottom of the screen.
Notes
• If the disk mode is set to "Normal," then set Total Recording Rate to 100 IPS or less. If the disk mode is set
to "Mirror," then set Total Recording Rate to 50 IPS or less. Settings above these are not possible.
• When the hard disk expansion unit is connected, intermissive audio reproduction may occur when playback
is performed during recording. In such cases, decrease the live image transmission picture quality of the
network settings, recording picture quality of the recording settings, or the recording rate.
Total rec rate:
When Alarm Event Recording mode is set to "Sequence" :
The total recording rate for each of the cameras is displayed. If the recording rate for one camera is a smaller
value than "Recording Rate Other Than Event Cameras," then its recording rate is regarded as the "Recording
Rate Other Than Event Cameras" when calculating.
When Alarm Event Recording mode is set to "Last" :
Displays the total of the largest recording rate of one camera out of those to be recorded and the sum of
"Recording Rate Other Than Event Cameras" of other cameras (other cameras' recording rate is all regarded
as the "Recording Rate Other Than Event Cameras" even if each of their rates is smaller than that).
