Toa C-DR091D PL Operating Instructions Manual Download

Page: 8 / 132

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

CAUTION

When Installing the Unit

• Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock.

• When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord

itself. Operating the unit with a damaged power supply cord may cause a fire or electric shock. When
removing the power cord, be sure to hold its plug to pull.

• When moving the unit, be sure to remove its power supply cord from the wall outlet. Moving the unit with the

power supply cord connected to the outlet may cause damage to the power supply cord, resulting in fire or
electric shock.

• Do not block the ventilation slots in the unit's cover. Doing so may cause heat to build up inside the unit and

result in fire.

• Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the

heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric
shock.

When the Unit is in Use

• Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal

injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.

• Clean the unit periodically. Contact your TOA dealer regarding the cleaning. If dust is allowed to accumulate

in the unit over a long period of time, a fire may result.

• If dust accumulates on the power supply plug or in the wall AC outlet, a fire may result. Clean it periodically.

In addition, insert the plug in the wall outlet securely.

• Switch off the power, and disconnect the power supply plug from the AC outlet when cleaning or leaving the

unit unused for long periods of time. Doing otherwise may cause a fire or electric shock.

• An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in the

electrical installation of the building.

Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.

WARNING

When the Unit is in Use

• Do not touch the power supply plug or control line during thunder and lightning, as this may result in electric

shock.

• The socket-outlet shall be installed near the equipment and the plug (disconnecting device) shall be easily

accessible.

• A readily accessible disconnect device shall be incorporated in the building installation wiring.

Summary of Contents for C-DR091D PL





































































































































Search results

Summary of Contents for C-DR091D PL

Reviews:

Related manuals for C-DR091D PL

Brands by name

Popular brands

Toa C-DR091D PL, Operating Instructions Manual

Search results

Summary of Contents for C-DR091D PL

Reviews:

Related manuals for C-DR091D PL

Brands by name

Popular brands