101
9
TH2 sensor fault
29
Communication fault of slave
unit 3#
10
TH3 sensor fault
30
Real-time clock fault
11
TH4 sensor fault
31
Storing device fault
12
TH5 sensor fault
32
Insufficient pressure difference
13
TH6 sensor fault
33
Discharge superheat degree is
too high or too low
14
TH7 sensor fault
34
High voltage is too low
15
TH8 sensor fault
35
Low voltage is too low
16
Inverter compressor-top
temperature sensor fault
36
Discharge or compressor-top
temperature too high
17
Fixed speed compressor-top
temperature sensor fault
37
Ambient temperature too
low/high
18
Inverter compressor
overload
38
No communication between
IDU and ODU
19
Fixed speed compressor
overload
39 System
failure
40~104 indicates communication failure between IDU and ODU, for example, 40 indicates
communication failure between IDU 1# and ODU, 41 indicates communication failure
between IDU 2# and ODU, and so on.
②
Applicable to TIMS-AS/AX
Fault code
Content
Fault code
Content
0
INV1 high pressure switch
fault
20
Unmatched capacity between
IDU and ODU
1
FAN1 drive fault
21
Low pressure sensor fault
2
INV1 compressor overload
22
High pressure sensor fault
3
Discharge temperature of
INV1 compressor
23
TH9 sensor fault
4
INV1 drive communication
fault
24
INV2 high pressure switch fault
5
FAN1 drive communication
fault
25
FAN2 drive fault
6
INV1 drive overheat fault
26
INV2 compressor overload
7
INV1 drive fault
27
Discharge temperature of INV2
compressor is too high
8
THo1 sensor fault
28
INV2 drive communication fault
9
THo2 sensor fault
29
FAN2 drive communication fault
10
THo3 sensor fault
30
INV2 drive overheat fault
11
THo4 sensor fault
31
INV2 drive fault
12
THo5 sensor fault
32
Insufficient pressure
Summary of Contents for P70131000000
