TICA P70131000000, Manual, Page: 68 / 174

68
When DIP switch 5 is 1, the four digits indicate system quantity; when DIP switch 5 is 0,
the four digits have no meaning. See Table 2 for definition:
Table 2:
DIP
switch 1
DIP
switch 2
DIP
switch 3
DIP
switch 4
Function
System quantity
0 0 0 0 When DIP switch
5 is 1, the four
digits indicate
system quantity;
when DIP switch
5 is at other
positions, the four
digits have no
meaning.
1
0 0 0 1 2
0 0 1 0 3
0 0 1 1 4
0 1 0 0 5
0 1 0 1 6
0 1 1 0 7
0 1 1
1 8
Notes: Equipment address DIP switch must start from 000 and in a continual
manner .
No. 6 digit: model selection. OFF: TIMS-AA, ON: TIMS-AS;
No. 8 digit: 485 communication and TTL communication settings. OFF: TTL
communication; ON: 485 communication; (485 communication mode is applied to TIMS
centralized wired controller);
S2 DIP switch:
No. 6 digit: communication baud rate settings, see Table 3:
Table 3:
DIP switch 6 Function Baud rate
0
Baud rate settings
19200
1 9600
Digits 1~5: When Modbus is activated, these five digits define Modbus addresses. For
details, refer to Table 4:
Table 4:
DIP switch 1
DIP
switch 2
DIP
switch 3
DIP
switch 4
DIP
switch 5
Modbus address
0 0 0 0 0 1
0 0 0 0 1 2
… … … … … …
1 1 1 1 1 32
Notes: 1. Each time DIP switch is changed, it is necessary to reset the centralized
controller.