TICA P70131000000, Manual, Page: 67 / 174

67
Notes:
1) In the first method: if ODU is a modular unit, communication cable of centralized
wired controller must be connected to the master unit. In addition, PC monitoring
software is unavailable.
2) Fix the centralized wired controller to the wall the same as fixing a wired controller.
3) Use centralized wired controller with care. Damages may be caused if dropping it on
the ground or into water.
4) In the first installation method, each master unit address is unique and continual and
starts from 01: master unit 1: AR01 master unit 2: AR02 master unit 3: AR03......
5) Address settings: SP03 monitors equipment address setting in a uniform way; SP04
monitors communication baud rate setting in a uniform way.
3.2 DIP switch description of TIMS centralized wired controller
ON KE
1 2 3 4 5 6 7 8
S2 S1
ON KE
1 2 3 4 5 6 7 8
S1 DIP switch:
No. 5 digit: communication mode setting, ON by default; refer to Table 1 for its definition:
Table 1:
DIP switch 5 Function Definition
1
Communication mode,
corresponding to methods of
installing centralized wired
controller in Page 2 Installation method 1
0
Installation method 2