TICA P70131000000, Manual

Page: 5 / 174

5

Make sure to dispose of the old batteries after removing them from the remote
controller. Keep these batteries away from children.
Precautions after Repair
 Residual current device may be provided depending on circumstances to prevent
electric shock.
 Do not install the unit where flammable gases are present, as it may cause fire.
 Install sealing parts and pads to mounting rack correctly, as improper installations
may let water in room and wet furniture and floor.
Check after Repair
 Check to make sure that power plug is clean and fastened securely, and then insert
the power plug into power socket. If power plug is dirty or loosened, electric shock or
fire may occur.

If cables and wires are scratched or damaged, make sure to replace them with new
ones, as broken cables or wires may cause electric shock, overheating or fire.
 Do not use cables in tandem or stretched cables. Use a separate socket. Otherwise,
it may cause electric shock, overheating or fire.
 Check whether all parts are fastened reliably, wires connected correctly and welding
part or crimping part connected securely. Improper installation or wiring may result in
electric shock, overheating or fire.
 Replace the corroded mounting stand or rack with a new one, as the old ones may fall
off and cause personal injuries.
 Check grounding. If the unit is grounded improperly, repair it immediately, as improper
grounding may cause electric shock.
 After repair, measure insulation resistance to make sure that the value is at least
1 M Ω , as improper insulation may cause electric shock.

After repair, check IDU drainage status, as improper drainage may allow water enter
the room and wet the floor or furniture in it.