Thermo 48i, Instruction Manual

Page: 291 / 302

C-Link Protocol Commands
Record Layout Definition
Thermo Electron Corporation Model 48 i Instruction Manual B-45
This is a line that starts a new column (the \xC or ^L),
'
Comp:6.11x{off on}Tset temp comp %s\n
'
This shows that the bitfield end (the second part of a bitfield specification)
is optional. The bitfield will be one bit long, starting in this case at the
eleventh bit.
'
Background:7f*8Bd.ddd;set o3 bkg %s\n
'
This shows the use of indirect precision specifiers for floating point displays.
The background value is taken from the 7th element, and the precision
specifier is taken from the 8th. If the asterisk were not present, it would
indicate instead that 8 digits after the decimal point should be displayed.