manualshive.com logo in svg

Thermo 48i, Instruction Manual

Share
Download
Thermo 48i Instruction Manual Download Page 119

Operation

Alarms Menu

Thermo Electron Corporation

Model 48

i

 Instruction Manual

3-97

Motor Speed

The Motor Speed screen (read only) displays the current motor speed. A 
reading other than 100.0% indicates a problem with either the motor or the 
power supply.

•

In the Main Menu, choose Alarms > 

Motor Speed

.

•

Press 

 to return to the Alarms menu or 

 to return to the 

Run screen.

Zero and Span Check

The Zero Span Check screen allows the user to view the status of the most 
recent zero check and set the maximum zero check offset. The zero and 
span check screens are visible only if the zero/span check option is enabled 
and function the same way.

•

In the Main Menu, choose Diagnostics > Voltages > 

Zero 

or

 Span 

Check

.

•

Use the 

 and 

 to move the cursor up and down.

•

Press 

 to select a choice.

•

Press 

 to return to the Alarms menu or 

 to return to the 

Run screen.

XXLO W

CONCENTRATION

XXLO  W 

                           
 CO           15.80 PPM  
                           
SAMPLE     12:34    ALARM

x

MOTOR SPEED:               
 ACTUAL           100.0 %  
                           
                           
                           
                           
                           
                           
                           
 RANGE  AVG   DIAGS ALARM  

Summary of Contents for 48i















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands