Thermo Scientific ThermoFlex10000, Installation, Operation And Maintenance Manual, Page: 132 / 210

Section 4
4-10 ThermoFlex
Thermo Scientific
Figure 4-6
Setup Loop (All Chillers)
•
StArt
is used to enable/disable the auto restart
function. When enabled the chiller will automatically
restart after a power failure or power interruption
condition.
Range: on or oFF Default: oFF
NOTE Consider any possible risks before enabling
this mode of operation.

•
CArE
is used to set the preventive care cleaning
frequency reminder for the chiller's air and fluid
filters, in hours. The time selected is based on your
operating environment, see Section 6.
Range: off Default: L1
L1 (1000 hours)
L2 (2000 hours)
L3 (3000 hours)
Off disables the reminder. Exceeding this limit
flashes FLtrS , see Section 6.
Note If your chiller is equipped with any of the
Optional Features refer to the next page.

When the display indicates StorE press
to save all changes or press to not save
all changes. The display will return either the process
fluid temperature or, if the chiller was off when you
entered the loop, a blank screen.
Continued from previous page
xx
on
oFF
Lx
CArE
AUto
StorE
StArt
CArE
enter
enter
enter
enter
Save all changes
Do not save all changes