71-6417
43
Maintenance
S
AMPLE
-
DRAW
S
UBCOMPONENTS
Periodically check the probe, hoses, internal filter, and tubing for obstructions
that can accumulate over time.
This is especially important if you use the
Innova in a dusty or dirty environment.
Replace the cotton and hydrophobic
filter elements if they become contaminated or discolored.
WARNING
Operation of instrument without probe/filter assembly attached
will result in pump damage and possible impaired performance.
Do not operate without probe/filter assembly attached.
Troubleshooting
NOTE
See Chapter 3, Start Up & Operation, for any of the various alarm
indications that you may encounter while the Innova Series gas
monitor is in normal use.
The troubleshooting section on the following pages describes symptoms and
probable causes and recommends action for problems you may encounter
with the Innova.
