20
71-6417
Innova Series Operator’s Manual
Advanced Features Menu
The Advanced Features Menu allows you to change the following parameters
of the instrument.
The menu is as follows:
• Edit Alarms
• O2 Alarm Configuration
• Alarm Latch Option
• Alarm Delay Selection
• Lunch Break Option
• Backlight Delay Selection
• Calibration Interval Selection
• Bump Test Option
• Sensor Select
• Setting Auto Cal Gas Values
• Comfort Alert Options
• Temperature Alarm
• Change Cal Word
• Change Password
• Change Logword
• Exit
To enter the Advanced Features Menu:
1. Press and hold both the
↑
AIR
and
↓
RANGE
buttons for 3 seconds.
The screen displays
“FEATURES MENU”
and counts down from 3
seconds.
2. The first screen displayed after the countdown is
“BEGIN CAL”.
Press the
↓
button, then press the
→
button. If prompted by
“PASSWORD”
and
“***”
, enter a password as described in the
previous section, Accessing Password-Protected menus. When entered
correctly, or if PassWord is not enabled, you are now at the first option
“EDIT ALARMS”
in the Advanced Features Menu.
NOTE
The Innova has a time-out feature. While in the Advanced Features
Menu, if a button is not pressed within 10 seconds the display will flash
and the buzzer will beep for 10 seconds. If no button is pressed during
the 10 seconds, the Innova will return to normal operating mode.
