71-6417
19
User Program
Accessing Password-Protected Menus
A password may be used to add extra security to the following menus:
• Advanced Features protected by “PASSWORD”
• Datalogging Menu protected by “LOGWORD”
• Calibration Menu protected by “CALWORD”
See Create/Edit CalWord/PassWord/LogWord for details on creating a
password. If enabled, a code must be entered before the user may enter
these menus.
To enter a PassWord, LogWord, or CalWord:
1. Press and hold
↑
and
↓
for 3 seconds. The message
“FEATURES
MENU”
appears on the display and counts down from 3 seconds, and
then displays “BEGIN CAL”. Press
↓
to scroll to
“ADVANCED
FEATURES”
or
“DATALOG MENUS”
.
2. Stop scrolling at the desired screen and press
→
to accept. The display
now reads
“PASSWORD”
,
“LOGWORD”
, or
“CALWORD”
and
“* * *” (if protection has been enabled). The cursor is on the first
asterisk.
NOTE
If the “***” does not appear when entering any of the three menus,
security protection is not enabled.
3. Press
↑
or
↓
to scroll to the correct character.
4. Press
→
to accept. The cursor moves to the next character.
5. Repeat steps 4 and 5 until all three characters are accepted. If your
entry is correct, you will advance to the next screen. If your entry is
incorrect, you will return to the original screen. Begin at step 2 to re-
enter your password.
