4
71-6417
Innova Series Operator’s Manual
Optional Accessories
Table 1-3 lists the optional accessories available for the Innova Series gas
monitor. Part numbers for all accessories are in Appendix A, Parts List and
Accessories.
Table 1-3
Innova Series Optional Accessories
Accessory
Description
NiCd battery charger
Charges NiCd batteries while still in the monitor.
Provides a full charge over an 8-hour period, then drops
to a sustaining rate. Includes an alkaline recognition
feature that prevents you from attempting to recharge
alkaline batteries.
Optional hoses and probes
Lengths of hose up to 100 feet are available (except Cl
2
versions). Two optional 30-inch probes (aluminum
with dust filter or fiberglass with hydrophobic filter)
are available.
Dilution fitting
Used to provide sufficient oxygen to allow proper
response of the hydrocarbon (LEL/ppm) sensor when
sampling inert environments.
Moisture trap
Glass-bodied with a pleated paper filter that collects
excess water that is drawn into or condensed in the
sample hose.
Auxiliary hydrophobic
filter
A filter with a water-impervious membrane that
connects between the sampling hose and the Innova’s
inlet fitting.
Remote Buzzer
Repeats all audible alarms of the Innova. Plugs into the
remote alarm jack (CHGR). Includes clip to attach to
lapel or other convenient place.
Carrying case
A case that holds the Innova and the most commonly
used accessories. The case also has space to hold the
NiCd battery charger.
Confined space kit
This carrying case can contain all equipment and the
most commonly used accessories necessary to safely
and accurately calibrate and use the Innova.
Calibration kit
A kit consisting of a carrying case containing gas
cylinders, valves, and appropriate fittings to calibrate
the Innova.
Data retrieval kit
(Innova View)
Windows 95/98/NT compatible software necessary to
access the data stored in the Innova (includes serial
cable).
