Thermo Scientific Heracell Vios 160i CR, Operating Instructions Manual

Page: 13 / 216

Thermo Scientific
Heracell Vios 160i / 250i CR
1
P
Preface
General Notes
Identification of the Device and of the Documentation
Identification of the Device
Identification data

Device name:
CO
2
incubator

Unit Name:
Heracell Vios 160i CR

Heracell Vios 250i CR
Allocation of product documentation

Documents CD-ROM 50163127


Certifications and quality audit :

Certification: CE Certification

Test mark: TÜV GS, cCSAus, EAC
Instruction of the Operating Personnel
These operating instructions describe the CO
2
incubator Heracell Vios 160i / 250i CR . The CO
2
incubator has been manufactured in keeping with the latest technological developments and is
operationally safe. However, the device may present potential hazards, particularly if the device is
operated by inadequately trained personnel or if it is not used in accordance with the intended
purpose. Therefore, the following must be observed to prevent accidents:
• The CO
2
incubator must be operated only by trained and authorized personnel.
• For any operation of this device, the operator must prepare clear and concise written instructions
in the language of the operating and cleaning personnel based on these operating instructions,
applicable safety data sheets, plant hygiene guidelines, and technical regulations, in particular:
• which disinfection measures are to be applied for the device and accessories,
• which protective measures apply when specific agents are used,
• the measures to be taken in case of accidents,
• which precautions and rules of conduct are necessary when entering and working in a clean room.
• Repairs to the device must be carried out only by trained and authorized expert personnel.