Thermo Scientific Heracell Vios 160i CR, Operating Instructions Manual

Page: 185 / 216

12
Data Communication
Overview of Incubator Parameters (Addresses 2xxx)
Thermo Scientific
Heracell Vios 160i / 250i CR
12-7
Reading Internal Function Parameters
*1) See table with notes on sterilization and autostart run status.

*2) Two bytes each per level.

*3) Cylinder A active (0x01), cylinder B active (0x02), pressure in cylinder A OK (0x10), pressure in
cylinder B OK (0x20).

*4) For other Informations on the Error Log, see Chapter 13.5.

*5) Place the reading pointer on the first entry, read up to 7 entries max.

*6) Send the next 7 entries. Set reading pointer automatically to next new entry, read up to 7 entries max.

*7) Re-send entries of last telegram. Can be used after communication error has occurred.
Address Description Remarks
2100 Status of run
*1)
and

Remaining run time
[hours:minutes]

Sterilization, date

and time of last start
25 bytes / decimal value

with the format

xx;+xxx:xx;xx.xx.xx;xx:xx
2105 Status of run
*1)
, current

CO
2
waiting period

[minutes:seconds]

auto-start, Date and time of last start
25 bytes / decimal value

with the format
xx;xx.x;+xxx:xx;xx.xx.xx;xx:xx
2140 Status of as cylinder changeover
switch

Read CO
2
*3)
2 bytes / hexadecimal

with the format xx
2141 Status of as cylinder changeover switch

Read O
2
*3)
2 bytes / hexadecimal

with the format xx
2300 Read the Error Log

(current errors)
*4)
Up to 241 bytes / hexadecimal value

Format, see section on this topic
2301 Read the Error Log

(older errors)
*4)
Up to 241 bytes / hexadecimal value

Format, see section on this topic
2400 Query (Start) of data stored in the
data logger
*5)
Up to 224 bytes / hexadecimal value

Format, see section on this topic
2401 Query of other data stored in the
data logger
*6)
224 bytes / hexadecimal value

Format, see section on this topic
2402 (Repeat) query for last data logger
query
*7)
224 bytes / hexadecimal value

Format, see section on this topic
2410 Read out writing cycle of the data
logger in hours/minutes/seconds 8 bytes / decimal value with the
format xx:xx:xx