Thermo Scientific Dionex AutoTrace 280, Operator'S Manual

Page: 60 / 166

Dionex AutoTrace 280 Operator’s Manual
52
Doc. 065330-05 03/2020
cartridge holder O-ring due to the presence of packing debris on the inside
walls of the SPE cartridge.
12. For the Dionex AutoTrace 280 cartridge model:
a. Place cartridges in each holder to be used by sliding a cartridge upward
onto the bottom of the cartridge holder's plunger.
b. Push down on the lever until the assembly “clicks” into place and the
holder's LED comes on (see Figure 3-1 ).
Figure 3-1. Cartridge Holder Front View
For the Dionex AutoTrace 280 disk model:
a. Place disks in each holder to be used by opening the disk holder (by
unscrewing the locking collar), squeezing the clip and moving it up
toward the lever, and sliding the holder up (see
Figure 3-2 ).
LED
Lever
Plunger
Cartridge