1 • Introduction
Doc. 065330-05 03/2020
3
AutoTrace 280 and the PC, the Dionex AutoTrace 280 must be connected to a
USB (Universal Serial Bus) 2.0 port on the PC.
NOTE If you connect the USB cable to a USB 3.0 port, the
system will not operate correctly.
1.2
About This Manual
The electronic version (i.e., PDF file) of the Dionex AutoTrace 280 operator’s
manual contains numerous hypertext links that can take you to other locations
within the file. These links include:
•
Table of contents entries
•
Index entries
•
Cross-references (underlined in blue) to sections, figures, and tables
If you are not familiar with how to navigate PDF files, refer to the Adob
e
Acrobat
or Adobe Reader
Help for assistance.
Chapter 1
Introduction
Introduces the Dionex AutoTrace 280; explains the
conventions used in this manual, including safety-related
information.
Chapter 2
Description
Describes Dionex AutoTrace 280 operating features and
the extraction process.
Chapter 3
Operation and
Maintenance
Provides operating instructions and routine preventive
maintenance procedures.
Chapter 4
Troubleshooting
Lists error messages and how to troubleshoot them; lists
operating problems and how to resolve them.
Chapter 5
Service
Provides step-by-step instructions for routine service and
parts replacement procedures that the user can perform.
Appendix A
Specifications
Provides specifications and installation site requirements.
Appendix B
Installation
Describes how to install the Dionex AutoTrace 280.
Appendix C
Reordering
Information
Lists spare parts for the Dionex AutoTrace 280.
