Dionex AutoTrace 280 Operator’s Manual
140
Doc. 065330-05 03/2020
Figure B-15. Dionex AutoTrace 280 Left-Side View
2. Make sure each compression fitting is finger-tight.
Tip:
If necessary,
you can remove any switching valve from the left-side panel to
improve access to the valve fittings.
3. Perform the same check for the compression fittings on the pumps
and the cartridge or disk holders on the front of the system.
B.3.6
Installing the AutoTrace Software
Always install the AutoTrace software
before
connecting the USB cable
or turning on the power to the Dionex AutoTrace 280 and the PC. This
ensures that the USB driver for the Dionex AutoTrace 280 is
automatically loaded and the Microsoft Windows operating system can
detect the system when the power is turned on.
1. For a local PC: Log onto Windows as an administrator.
For a network PC: Log on as a user with local PC administrator
privileges.
2. Insert the AutoTrace software CD (P/N 072581) into the CD drive.
Air Push Valve
Compression Fitting
Switching Valves
