B • Installation
Doc. 065330-05 03/2020
135
Figure B-9. Waste Tubing Connections
7. Route the two waste lines as follows:
a.
Connect the cap of the solvent waste tubing (the tubing connected
to the front drain trough) to one of the waste containers, making
sure the waste container tubing never drops below the level of the
waste container cap.
b. Connect the cap of the aqueous waste tubing (the tubing
connected to the rear drain trough) to the remaining waste
container, making sure the waste tubing never drops below the
level of the waste container cap. If you route the aqueous waste
tubing to a drain, make sure you follow the same tubing
guidelines.
c.
If necessary, cut the tubing to the required length with wire
cutters or scissors.
Solvent Waste Tube (front drain)
Aqueous Waste Tube (rear drain)
